|
ANNEX
B
CHECKLIST
OF POSSIBLE CONTAMINANTS
Please
indicate whether the following materials have been used, stored
or generated on the site.
| Materials |
Possible
Source |
Yes/No |
Method
of Disposal (historical & current ), if applicable (see
Note below) |
| 1.
Fuels |
Petroleum
storage, LPG storage |
|
|
| 2.
Lubricating oils, hydraulic fluids |
Spillage,
maintenance and dismantling of equipment, scrapped tanks
and pipeworks, vehicle maintenance |
|
|
| 3.
Cleaning solvents |
Engine
room and equipment maintenance |
|
|
| 4.
Used chemical solutions |
Engine
coolant, battery fluid |
|
|
| 5.
Acids |
Treating
steel plate to remove millscale |
|
|
| 6.
Asbestos |
Application
and removal of engine room insulation |
|
|
| 7.
Transformer oil (PCB) |
Scrapped
electrical equipment |
|
|
| 8.
Anti-corrosive paints, thinners |
Application
of anti-corrosive coatings |
|
|
|
9. Coal, ash, oily tank and bilge sludge |
Boiler
room/engine room maintenance, tank cleaning |
|
|
| 10.
Finely divided metal wastes |
Grinding
and milling operations, especially welding joints |
|
|
| 11.
Electrical wiring |
Electrical
installation, maintenance, scrapped electrical equipment |
|
|
| 12.
Low-level radioactive waste |
Scrapped
instruments |
|
|
| 13.
Wood preservatives |
Timber
treatment |
|
|
| 14.
Polyurethane foam |
Hull
manufacture/ maintenance |
|
|
Note:
Methods of disposal include:
i)
collection by a municipal solid waste collector;
ii)
collection by a licensed chemical waste collector;
iii)
disposal to foul sewer in liquid form;
iv)
disposal to storm drain in liquid form;
v)
burial at pits within the site.
|
|