Table 11

Table 11.2 Implementation Schedule for Construction Noise Control

EIA Ref^#	Environmental Protection Measures / Mitigation Measures	Location / Timing	Implementation Agent	Implementation Stages*				Relevant Legislation and Guidelines
EIA Ref^#	Environmental Protection Measures / Mitigation Measures	Location / Timing	Implementation Agent	Des	C	O	Dec
S4.8.1	Good Site Practice · Only well-maintained plant should be operated on-site and plant should be serviced regularly during the construction program; · Silencers or mufflers on construction equipment should be utilized and should be properly maintained during the construction program; · Mobile plant, if any, should be sited as far from NSRs as possible; · Machines and plant (such as trucks) that may be in intermittent use should be shut down between work periods or should be throttled down to a minimum; · Plant known to emit noise strongly in one direction should, wherever possible, be orientated so that the noise is directed away from the nearby NSRs; and · Material stockpiles and other structures should be effectively utilized, wherever practicable, in screening noise from on-site construction activities.	Work site / During the construction period	Contractor		Ö			ProPECC PN2/93 and Noise Control Ordinance
S4.8.2- S4.8.4	Use of quiet PME	Work site / During the construction period	Contractor		Ö			ProPECC PN2/93 and Noise Control Ordinance
S4.8.5- S4.8.6	Use of movable noise barriers and temporary noise barrier	Work site / During the construction period	Contractor		Ö			ProPECC PN2/93 and Noise Control Ordinance
S4.11.1	Environmental Monitoring and Audit (EM&A) programme is recommended to be implemented during the construction stage.	Work site / During the construction period	Contractor		Ö			-

# All recommendations and requirements resulted during the course of EIA/EA Process, including ACE and / or accepted public comment to the proposed project.

* Des - Design, C - Construction, O – Operation, and Dec - Decommissioning